 |
RCSLS1
LogiStop® Remote Control Station
Keypad remote control station provides access to up to 20 preset stops or cues as well as access to the programming and jog functions of the LogiStop® controller. The unit is designed for flush mounting in a wall or control cabinet and is equipped with an etched Lamacoid faceplate, internal terminal strips for field connections and a metal junction box.
Use only with Model LS-1 Logistop® equipped machines. |
 |
CCF-3
Curtain to Carrier Fastener
New larger style S-hook makes attaching the curtain to the track carriers easier.
1/8" wire, 2-1/4" long x 1/2" wide
Non-bright plated finish.
Always in stock.
|
|
Flying Inline
Machines
Need a machine that can fly up with the track?
Need a machine that can sit above the site line?
Do you want to use an Inline machine, but you don't have enough room at the end of the track?
The new ADC Flying Inline is the answer.
Same proven technology of the Inline series of machines with the ability to reside above the track.
Available for Models 280, 170 and 500 track systems.
.. |
 |
Threaded Rod Mounting Bracket
Model "THREADR"
Designed in response to requests from our dealers and installers, this bracket allows suspension of our various models of track from tensile rated threaded rod.
The clamp is fabricated from hardened steel and has a center hole large enough to accept 1/2" threaded rod. The hole is centered on the clamp and thus centered over the track to provide a balanced mount.
Track hanging clamps, such as the one shown, are not included. |
|
 |
New Model 9507TV
Hercules® Lift Machine
With stages getting larger and larger, curtains are getting heavier and heavier. ADC responds to the need for a machine to lift the heavier curtains with our new Model 9507TV which is capable of lifting up to 1200 pound curtains.
The Model 9507TV features variable speed, acceleration and deceleration ramps, overcurrent protection, phase loss protection, and dynamic braking.
Of course like almost all ADC machines, the Model 9506TV is ETL/UL listed.
Contact ADC for additional information.
|
|
 |
New Horizontal Live End Pulley
Model 1703H for 170 Series Track Systems
This live end pulley can be used in place of the standard Model 1703 Live End Pulley when the project calls for the floor pulley to mounted at the rear of the stage or at another remote location. The pulley routes the operating lines horizontally and at a 90 degree angle relative to the track. A mule sheave (Model MB-2) can be used at the back wall to route the cables to a floor mounted machine or tension pulley.
Note: The use of this type of pulley adds to the amount of force required to operate curtain.
|
|
 |
New Horizontal Live End Pulley
Model 2803H for 280 Series Track Systems
This live end pulley can be used in place of the standard Model 2803 Live End Pulley when the project calls for the floor pulley to mounted at the rear of the stage or at another remote location. The pulley routes the operating lines horizontally and at a 90 degree angle relative to the track. A mule sheave (Model MB-2) can be used at the back wall to route the cables to a floor mounted machine or tension pulley.
Note: The use of this type of pulley adds to the amount force required to operate curtain.
|
|
 |
New Style of Pipe Mounted Sheaves
A new series of pipe mounted sheaves has been added to our current line of sheaves. The new style was designed for applications where the mounting pipe is running parallel with the top of the curtain, not in a grid pattern. This new series of sheaves attaches to a single overhead 1-1/2" schedule 40 pipe. The outboard side of the sheave is supported to an overhead structural member via forged eyebolts (included).
The new style sheaves are available in single line and multi-line configurations up to 20 lines total.
Call today for pricing and availability.
|
|
|
CHAIN TOOL
If you're attaching trim chain to carriers or adding trim chain to existing trim chain, you need one of these tools. This tool is designed to make opening and closing trim chain (TC-1 & TC-2) easy. Now in stock and available from ADC.
Model - CHAINTO |
|
 |
Now Available VERSION 8:
A completely new version of our interactive CD-ROM is now available. The new format includes easy to follow navigation tabs to find: quotation request forms in both print and electronic format, PDF versions of CAD files, our entire product catalog in PDF format, literature request forms, installation binders with electrical schematics, and more.
Get yours today.
|
|
 |
Floating Sandbag Tension
Floor Pulleys
Designed to be used in installations where a floor pulley cannot be mounted to the floor, or must be moved out of the way when not in use.
Available with 3" (FSBTP3), 5" (FSBTP5) and 8" (FSBTP8) wheels.
Supplied with sandbag capable of holding up to 10 pounds of sand. |
|
 |
Everything you wanted to know about the CWANA code system.
Here is a break down of the CWANA code system used by ADC. CWANA (which stands for Comes With All Necessary Accessories) makes ordering our products easy.
Click on the link to the left to download the document. |
|
 |
Motorized Masking Banners
Installed at Hartford Civic Center Hartford, CT
A new type of system which is used to hide unsold seats at arena, stadium and theatrical events making every event look like a sold out event.
|
|
|
Track Mounted Machines
Now you can get your machine off of the floor and free up that precious floor space. Models 2928 & 2917 attach to the end of Model 2800 and 1700 track respectively and hide behind the stack of the curtain. Units are shipped with track mounted limits, and a remotely located control box. Low voltage control is also standard equipment with these units.
ETL listed.
So get off the floor!!
|
Product Updates |
CWANA Codes for BLACK Track Systems
|
Due to popular demand, we are now offering all the variations of the 280, 170 and 140 track systems with a black finish. The new systems include tracks anodized or electrostatically painted black, as well as components plated or painted to a black finish. The track specification pages of this site have been updated to include these new systems. To determine the CWANA code for a black system, simply add 100 to the standard CWANA model number (170 in black would be 270, 284 in black would be 384, etc.) |
